Wooden pallets are indispensable in any warehouse. Wooden pallets are used to move, store and unload goods.
General information
The world’s first wooden pallets were made in the USA at the beginning of the 20th century. They were used to stack goods for transportation in wagons. Of course, the dimensions corresponded to the dimensions of the wagon. Today the sizes of wooden pallets are considered standard, but the area of application of wooden pallets has expanded a lot. In our country Euro pallets 1200*800 mm are very popular. Ruspallet Company produces wooden pallets of standard and non-standard sizes, depending on the needs of the customer and the parameters of his cargo.
Manufacture of wooden pallets
Production technology depends on the method of manufacturing wooden pallets, which can be manual, partially automated and with the use of automatic production line.
Our company produces wooden pallets in a partially automated way. Thus, each wooden pallet produced in our company meets all the requirements of GOST. Due to the production of wooden pallets from high quality materials, our pallets will serve you for many years. And if it is not necessary, we will gladly buy used wooden pallets for repair and further realization.
Euro pallets
They are designed for storing goods on them. Thanks to wooden pallets, the technological efficiency of all processes in the transportation of any goods is increased. But construction sites, all materials, whether bricks or expanded clay blocks, are delivered on Euro pallets.
Wooden Euro pallets are made of alder, aspen, if, pine, whose humidity level should be below 24%. Wooden europallet, standard size, is made of planed boards. All elements are fastened with nails, which provide appropriate strength of the structure. A standard Euro pallet consists of 20 elements, the total weight is about ten kilograms, and the load capacity of the Euro pallet is up to 2.5 tons.
Requirements
Manufacturing of wooden pallets is made of soft hardwood and coniferous wood. Low grade lumber is used for the production of wooden pallets.
Flaws on the boards are not allowed. Blanks for the production of wooden pallets must be intact, splicing is unacceptable. No knots are allowed in the places where fasteners are installed and on the ribs of the end planks. If knots have fallen off during processing, the holes will be sealed with plugs made of the same wood. Marking of wooden pallets is mandatory.